Instrument Tuner
–
ReadyPress Start tuner to begin.
– cents– Hz
Microphone off
How to tune with your microphone
- Pick your instrument, then press Start tuner and allow microphone access.
- Play one string at a time and let it ring. The tuner finds the nearest string and highlights it.
- Too low means tune up, Too high means tune down. Green means you are within 5 cents.
- Use Chromatic for keys, horns, vocals or any alternate tuning. Tap a string to hear its reference note.
Frequently asked questions
Does the tuner send my audio anywhere?
No. Pitch detection runs entirely in your browser. The microphone signal never leaves your device.
How accurate is it?
It reads to about 1 cent on a clean, sustained note. Pluck one string at a time, let it ring and keep other strings quiet.
Can I tune to 432 Hz or 442 Hz?
Yes. Open the reference pitch setting next to the instrument and set A4 anywhere between 415 and 466 Hz. Every note and reference tone follows.
Why does my low E or bass string jump around?
Low strings are rich in overtones. Pluck a bit softer, closer to the neck, and wait half a second after the attack for the reading to settle.